Old Regent Theatre

JackCoursey on September 24, 2005 at 12:22 am

Here are 2005 photos of the Regent www.flickr.com/photos/91428163@N00/tags/regent/

Tonya on August 27, 2006 at 1:30 pm

I remember the first movie I ever saw was at the old regent theatre and i was like 4 i saw bambi when it first came out lol i am 32 now and the old regent theatre has just reopened again a few years ago… kind of exciting even though i was only in there one time in my life i would love to take my kids in there to experience the joy i did as a kid….

Alan Bell on June 13, 2010 at 10:27 pm

The following article appeared in the June 2010 issue of “Signs of the Times” a trade magazine for sign builders.

Allegan Alight
By Ian Macartney

Jim Winter-Troutwine, a Grand Rapids, MI architect who specializes in restoring historical buildings, contacted me regarding a unique project for Allegan, a small town about 45 miles southwest of Grand Rapids. The city owned its local downtown movie theater and, using grant funding from the State of Michigan, wanted to restore the theater’s marquee and sign to their original condition. Allegan officials wanted the old theatre to serve as a central cog in downtown development while preserving the town’s well-known sense of history.

During my 25-year, neon-sign career, this was certainly the first time a customer possessed the funds and motivation to completely re-do a sign â€" let alone consider it “historic.” Back in the ’80s, it seemed people couldn’t tear down vintage, porcelain-enamel signs quickly enough. As a collector and sign aficionado, I was thrilled at the opportunity to complete a “frame-off” restoration.

Onsite conditions

The 10 x 20-ft. marquee and 10 x 12-ft. sign appeared, at first glance, to be in fair condition. Considering they were built in 1936, they looked remarkably vital. It had what I considered classic, art-deco lines, 11W, yellow, incandescent chaser bulbs, backlit marquee panels and tasteful, clear, green and blue argon and neon accents.

However, the red porcelain enamel had badly faded, and, besides numerous rust stains, the bottoms of the cabinets had been repaired with 0.040-in.-thick, white aluminum some time ago. The original, galvanized sheetmetal was long gone. Because the cabinets were secured to a heavy, I-beam subframe and bolted together, the loss of the bottom pieces didn’t seem to impact the overall structural integrity.

Amazingly, all but three of the 52 units of neon worked, and most appeared original. The project also included refurbishing the original, white, porcelain-enamel ceiling. Roof-drainage problems had exacted extensive damage to these panels as well.
The project’s mission required restoration of the entire structure to its original condition. Anyone familiar with restoring cars knows how much work this means. Every brass nut, bolt, screw, panel and socket has to be original as possible, saving as much of the structure as possible in the process.

No quick fix

With all the necessary paperwork completed, the entire structure came down during a blinding, April snowstorm. We dismantled the sign as a single piece, but the 10 ceiling panels were individually removed, and the marquee comprised three separate cabinets. Once removed, the components’ rust eliminated most structural integrity.
We carefully catalogued and boxed all neon parts, noted installation methods and stored the fastening hardware. It’s one thing to tear down a sign; removing it with the intent of creating an exact replacement presents a much greater challenge.

The contract called for October completion. When I agreed to the project, that seemed so far away. Within two weeks, we’d deconstructed the sign and sent the porcelain panels to Cherokee Porcelain (Knoxville, TN). This shop undertook the application of new porcelain coatings for the ceiling-panel faces, but needed several months because of a heavy backlog.

Working with the patterns of the original faces, we repaired the missing cabinet portions. We repaired its structure with patches of galvanized sheetmetal. We made one approved deviation from the original: a new, brushed-stainless-steel bottom, with drain holes! After having taken apart countless Holiday Inn porcelain signs during the ’80s, I understood the wisdom of using drainholes to allow water to pass easily through the structure.

Dealing with adversity

During mid-summer, Cherokee contacted us with bad news. The minerals used to produce the original porcelain coating were deemed incompatible with the modern minerals to be used for the overlay’s production. The process of discovering this wrecked several of the original panels.

The only solution: Cherokee had to refabricate every panel to precisely match the originals. They plotted out and digitized every single hole, radius and dimension for the laser equipment to cut and bend the metal. The deadline rapidly approached. The final complication was getting the red to match the original, which was tricky. The original yellow and green porcelain matched perfectly, but we lost several weeks during the fabrication process.
In September, the panels finally arrived in good shape. With porcelain, one dent or pinch can ruin the panel. Rust encroaches where bare steel is exposed. No holes or modifications can be included after the coating is applied and baked on. Either it fits or it doesn’t; by nature, porcelain is very unforgiving. For-tunately, the panels fit the original cabinets very well.

However, the neon-housing holes all were just enough askew to render the carefully boxed neon useless. All 52 pieces, which comprise 475 linear ft., had to be repatterned and remade. We used Voltarc 15mm and 13mm clear, 12mm green and 12mm blue neon. We had only four weeks left before the state inspection. We carefully fitted and wired the neon with porcelain lightbulb sockets and France transformers throughout.

I found a supplier who carried #9855 front-mount sockets (with two “ears”) and brass screws to match the original, as well as Philips 11W, yellow bulbs. We used #300 open-back, neon housings, which I’ve found help prevent shorts in the rain and are especially helpful with UL 2161-compliant transformers. This time-consuming work quickly ate up four weeks. There’s no such thing as a project without problems, is there?

A bittersweet end

Installation went smoothly â€" the four main units matched up perfectly with the supporting I-beam. The blade sign aligned over the marquee exactly as the original had. With all wires connected, there’s nothing like the feeling of throwing the switch and seeing an illuminated sign come to life.

On the dedication day one week later, the city organized a formal lighting event to culminate the $42,000 project. It drew a sizable crowd, and the collective exclamation was very, very rewarding. It was like lighting up a Christmas tree for kids! It was doubly rewarding to have a porcelain-neon sign valued by the community and recognized by the State of Michigan as historic.

Sadly, this project became the last large neon sign built by NeonAmericana. After 26 years of specializing in neon signs, I’ve seen the market for neon almost completely disappear. My new company, Lumichron, specializes in building illuminated clocks. It was somehow fitting to conclude my old shop with the reconstruction of a classic, art-deco piece of real Americana.

Equipment and Materials

Components: Eighteen- and 24-gauge, galvanized sheetmetal, from building-supply stores; medium-base, porcelain sockets, from Leviton Products (Huntington Beach, CA), (877) 389-0000 or www.levitonproducts.com; porcelain-coated steel panels, from Cherokee Porcelain (Knoxville, TN), (865) 637-7833 or www.cherokeeporcelain.com

Lighting: Clear, green and blue neon tubing, from Voltarc (Waterbury, CT), (800) 962-6366 or www.voltarc.com; neon electrodes, from EGL (Berkeley Heights, NJ), (908) 508-1111 or www.egl-neon.com; outdoor transformers, from France (Fairview, TN), (800) 753-2753 or www.franceformer.com; tube supports, from FMS (Minneapolis), (952) 888-7976 or www.fmsneon.com; #300 electrode housings and #9855 front-mount sockets, from neon-supply houses; GTO wire, from Electrobits (Montreal, QC, Canada), (877) 567-2487 or www.electrobits.com; Philips 11W, yellow, incandescent bulbs, from lighting-supply stores; and four-channel lighting chaser, from Time-O-Matic (Meriden, CT), (203) 634-4431 or www.shinersigns.com/timeomatic/

Tools: Plasma-cutting torch and welding equipment, from industrial-equipment and building-supply stores; installation crane, from Postema Signs and Graphics (Grand Rapids, MI), (616) 455-0260 or www.postemasign.com